Kit includes:

Rewind tool 19409, starter rope 280399S & handle 393152

 Used on most OHV engines.

13/16" and 5/8" socket. Contains part number 19374S.

 Used for 2 and 4 cycle engines.

Display flashes every 25 hours run time.
Displays up to 999 hours of run time and is resettable.

- Contains preventative maintenance tools for most Briggs & Stratton engines.

- Special screwdriver for installing & removing small carburetor jets.

- Special screwdriver for installing & removing large carburetor jets.

Installs valve springs on L-head engines

Fits the small L-head engines through 6.5hp, plus Europa.

Fits 5hp engines and below.

Tool used on cast iron engine models
5, 6 N, 8, 9, 14, 19, 20, 23, 240000, 300000, 320000.

Tool used on cast iron engine models
5, 6 N, 8, 9, 14, 19, 20, 23, 240000, 300000, 320000.

Tool used on cast iron engine models
5, 6 N, 8, 9, 14, 19, 20, 23, 240000, 300000, 320000.

Fits the 7hp / 8hp L-head engines, early 11hp

0 to 6 Inch

- The Tach that works on all engines, ideal to have in your tool box.

Fits larger L-head and most OHV engines

Use to install pistons in all engines

For servicing 5/16" valve guides.

Removes & Installs rewind starter clutches

For adjusting band brakes.

Includes 19266 & 19268

Used on Briggs & Stratton horizontal 3HP - 5HP engines.

Use this tool to install and remove piston rings quick and easy.

For finish reaming valve guide bushings after installation.

Briggs & Stratton spark tester

Tachometer/Hour meter  - Tiny Tach #TT2A

Works on all Briggs & Stratton engines.

Briggs & Stratton Torx bits in handy pouch. 8 Bit Sizes:

- For quick and easy removal of primer bulb and retainer on engines with primer bulb system.

- For quick and easy installation of primer bulb and retainer on engines with primer bulb system.

An improved version of a valuable diagnostic tool.

Governor Tang Bending Tool

- Fast, accurate method of checking cylinder bore size, taper and out of round.

Check carburetor inlet needles and seats for leakage.

- Extremely accurate and simple tool for measuring crankcase vacuum.

Use to establish polarity of magnetic poles.

Used for checking the frequency (Hz) on a running generator.

- Used to test the sealing capabilities of the compression components.

Fine & Course

All NEW tool catalog including new tools just out from Briggs.

Contains a complete listing of all the Special  tools and tools sets offered by Briggs & Stratton for working their engines, gas and diesel.

This is the kit that all dealers are required to have.